TEESING DEVELOPS SUSTAINABLE 700-BAR FILLING TECHNIQUE
The automotive industry definitely sees a future in hydrogen as a promising alternative fuel. More and more well-known car brands such as Toyota and Hyundai have started introducing their first ‘hydrogen cars’. Up till now only a few trucks, delivery vans, buses and passenger cars in the Netherlands have been powered by hydrogen, but it is expected that this will expand with more passenger cars in the coming years. Various companies in the Netherlands want to facilitate this development and they are working hard on the development of fuel cells and the production, storage and distribution of hydrogen. Teesing has already devoted several years to optimising the critical processes so that ‘driving on hydrogen’ will be practical and sustainable in the future.
In the future, real integration and acceptance of hydrogen vehicles in our society will depend partly on the critical issue of ease of use for the public and familiarity with this ‘new’ type of energy. As human beings we are more quickly inclined to switch if things become cheaper, faster, more efficient, safer or more sustainable. Teesing recently finished the PusH project, in which we successfully filled cylinders fast and efficiently with hydrogen at 700 bar.
WHY 700 BAR?
Hydrogen has a lower energy content than natural gas, which means that the same volume contains less energy. To be precise, three times less than natural gas. Refuelling hydrogen at a higher pressure (so 700 bar) supplies enough energy to give a hydrogen car a respectable range. The hydrogen cylinder will have to be filled at 700 bar within 3 minutes, because most consumers will not wait longer than that at the filling station.
PROBLEMS AT 700 BAR:
The crux of the problem with filling hydrogen gas at high speed is that hydrogen gas expands when it becomes hot. Currently the solution for this problem is to pre-cool the hydrogen gas, but this inefficient method results in unnecessary loss of energy.
SOLUTION FOR 700 BAR
Teesing has developed a system which counteracts the expansion. The cylinder is first filled with water at a pressure of 700 bar, after which the water is displaced by introducing hydrogen gas into the cylinder at 700 bar. The prototypes have been tested successfully and a patent has already been issued for the PusH principle.
No expansion, no heating, less energy loss and still possible to fill up FCVs quickly up to 700 bar. This method has the additional advantage that no extra action is required to moisten the hydrogen: fuel cells function more efficiently if the hydrogen has been moistened.
Teesing wants to follow up the commercial feasibility of this system. The company is considering a demonstration project by means of a subsidy or investment, in which the Tongji University can continue its involvement.
The following partners were involved in the completed project:
- Tongji University Shanghai, China
- WEH, Hydrogen refuelling components, Germany
- Itensify, High pressure & Flow control systems, Netherlands
Teesing would be pleased to have contact with new parties interested in establishing a demonstration project. Contact person at Teesing: Ms C. Jansen C.firstname.lastname@example.org or call +31 70 413 0741.
The Engineering department led by Mark van Bronswijk sees a significant increase in the issues from the market. A good example is the company Thales Netherlands which originated from the former Hollandse Signaalapparaten located in Hengelo (The Netherlands).
For an optimal Chemical process flow, reliable high quality connection solutions are essential.We understand that traceable products with the required material certificates and on site services are essential to our customers.
The quality of compressed air is essential for the operation of pneumatic systems. When compressing the air to, for instance 7 bar, the volume of air is compressed 8 times.
Meer informatie about filling techniques?
Contact our specialists: